HomeHomeHomeHome
menu
  • Solutions
      • Flat Roof
          • Flat Roof - view

          • Protects the building from all athmospheric influences just as a pitch roof does, but requires even more attention in its design. A key factor for both investor and designer is to create a durable and energy efficient roof. This is doable with well-thought-out and carefully checked system solutions.


          • Non-walkable flat roof
          • Walkable roof
          • Green Roof
          • Parking deck
      • Foundations
          • Foundation pillow

          • While the foundation's primary function is to transfer the building's load onto the load-bearing ground, it also directly affects the building's thermal envelope. To ensure the desired energy efficiency performance, low-energy buildings must be designed with a continuous and uninterrupted thermal envelope. This is much simplified if we use the foundation pillow - a foundation slab which is thermally insulated from below.


          • SESIMIC foundation pillow
          • Foundation pillow
          • Strip and point foundations
      • Pitch Roofs
          • Inclined roofs

          • Regionally, this is a traditional and well-tested type of roof construction. With new materials and developing expert knowledge, new solutions and different layer sequences are emerging, all due to an overabundance of new energy efficiency demands on the construction of roofs.


          • Massive roof
          • Skeletal roof
      • Façade
          • Façade

          • While a simple assembly at first glance, modern architecture is increasingly challenging constructors with numerous new final facade layers, which are key for the correct choice of thermal insulation. Moreover, as parts of the facade may be exposed to moisture, it is necessary to install thermal insulation with low water and moisture absorption.


          • ETICS façade
          • CAVITY façade
          • Cladded façade
      • Floors and Ceilings
          • ceiling-below-unheated-space

          • Floors and ceiling can have numerous intended uses and may be on various location within the building. We should carefully consider the appropriate placement of thermal insulation and sound transfer protection, simultaneously taking into account the positioning of thermal insulation (cold and heated sides of spaces) and moisture and vapor transmission properties in cases of differing relative moisture.


          • Slab on grade
          • Industrial floor
          • Floor above cold spaces
          • Ceiling below unheated space
      • Internal insulation
          • Internal insulation

          • As a rule, thermal insulation is installed on the outer (cold) side. Sometimes, however, it is necessary to install it from the inside. Interior thermal insulation must be carefully planned to avoid later problems with unresolved thermal bridges or water vapor diffusion.


      • Wall below grade
          • kletni-zid-dropdown

          • If in contact with soil, any below grade wall must be thermally insulated without regard whether the space behind such walls is heated or cold. If nothing else - the thermal insulation layer will protect the waterproofing from mechanical damage. Last but not least – the building's thermal envelope must be continuous and uninterrupted.


      • Special constructions
          • Cold storage

          • All constructions that were not adressed in other solution chapters - but are nevertheless frequently encountered - are special solutions.

            Typically, they are specific spaces in which constant thermal conditions have to be maintained with a minimal amount of energy. Good examples of special constructions are cooling units and swimming pools.


          • Cooling units
          • Swimming pool buildings
  • Products
      • FIBRANxps
            • FIBRANxps SEISMIC 400-700-L

            • Due to its exceptional technical characteristics, FIBRANxps the turquoise extruded polystyrene thermal insulation, is a vital material for both construction and industry use. It is manufactured with environmentally friendly gases and fulfills all European demands for ecologically produced materials.

              A special thermal insulation, FIBRANxps is used in moist surroundings and under extreme loads. The technical physical characteristics, board edges and surfaces of FIBRANxps products are designed according to demands of specific applications.


            • FIBRANxps 300-I
            • FIBRANxps 300-L
            • FIBRANxps 400-L
            • FIBRANxps 500-L
            • FIBRANxps 700-L
            • FIBRANxps SEISMIC 400-L
            • FIBRANxps SEISMIC 500-L
            • FIBRANxps SEISMIC 700-L
            • FIBRANxps ETICS GF
            • FIBRANxps ETICS GF-I
            • FIBRANxps ETICS BT
            • FIBRANxps MAESTRO
            • FIBRANxps FABRIC
            • FIBRANxps INCLINE
            • FIBRANxps FORM
            • FIBRANxps KOTNIK
      • FIBRANskin
          • FIBRANskin SEAL

          • FIBRANskin and FIBRANfilter are membranes for combined uses in FIBRAN solutions. Compared with other membranes, they perform excellently and are extremely durable.


          • FIBRANskin SEAL
          • FIBRANskin BARRIER
          • FIBRANskin VENT
          • FIBRANskin VENT SILVER
          • FIBRANfilter SF32
      • FIBRANhydro
          • FIBRANhydro T-3 sk

          • FIBRANhydro products are components of the SEISMIC foundation pillow. Functioning as waterproofing, they glue two FIBRANxps thermal insulation layers to one another. Different combinations within the FIBRANhydro product range facilitate additional protection classes from high groundwater or radon gas entry.


          • FIBRANhydro ANTI RADON 1,5 sk
          • FIBRANhydro SEISMIC T-1,8 sk/sk
          • FIBRANhydro T-3sk
          • FIBRANhydro E-KV-4
      • FIBRANgeo
          • FIBRANgeo

          • FIBRANgeo stone wool products offer thermal insulation, sound insulation and fire protection in buildings.

            FIBRANgeo products have excellent thermal insulating capability and low thermal conductivity even at high temperatures. The fibers withstand temperatures above 1000°C and maintain their insulating properties and dimensional stability despite evaporation of the binder resin at lower temperatures.


      • FIBRANgyps
          • FIBRANgyps-SMART

          • Thanks to their versatility, FIBRANgyps gypsum plasterboards make it possible to solve the most varied design requirements.

            Available in different types and thicknesses, FIBRANgyps plasterboards are ideal for fire protection, thermal and acoustic insulation, and moisture resistance, as well as excellent mechanical performance.

            All FIBRANgyps plasterboards are classified as A +, regarding the emission of formaldehyde, acetaldehyde and other substances.

            The new FIBRANgyps CARE products are able to absorb, retain and neutralize the formaldehyde present in the environment without any subsequent release.


  • Services
    • Events
    • Technical Support
    • Inclined Thermal Insulation
    • ArchiMAID Software
    • Building Site Support
    • Visit in Office
  • Downloads
    • Technical Drawings
    • Technical Datasheets
    • Catalogues
    • Declaration of Performance (DoP)
    • BIM
    • Pricelist
    • Certificates
    • Articles
  • Info
    • About Us
    • Team
    • Contact and Q&A
    • References
    • Architects and Contractors
    • Legal notices
    • Quality Policy
  • Languages
    • English
    • Deutsch
    • Österreich
    • Bosna i Hercegovina
    • Hrvatska
    • Česká republika
    • Deutschland
    • Magyarország
    • Северна Македонија
    • Polska
    • Србија
    • Slovensko
    • Slovenija
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

A durable and high quality energy shield for your building even in moist and wet surroundings and under extreme loads. It is our priority to offer you expert knowledge and a reliable team. You can count on our technical support - either on-site or in your office. Together, we will check your solutions, your design ideas and all details. An additional element of the upgraded SEISMIC foundation pillow, the FIBRANhydro ANTI RADON prevents the dangerous radon gas from entering the building through walls and floors in contact with soil. FIBRANxps SEISMIC 400-L , thermal insulation boards with a grooved surface especially designed for a better grip between the thermal insulation and the reinforced concrete slab, are elements of the SEISMIC foundation pillow system solution. Exact slopes and efficient drainage for flat roofs, parking lots, terraces, balconies and loggias - made easy and simple. In any application and assembly, FIBRANxps INCLINE thermal insulation boards improve thermal efficiency. FIBRANxps 500 in 700 kPa are thermal insulation boards for demanding applications such as airport hangars, driveways for heavy vehicles, warehouses with variable loads and similar. As one of a few manufacturers in Europe, we offer a complete range of XPS thermal insulation products in the 20 to 200 mm thickness range and from 300 to 700 kPa compressive strength. With a wide range of products in store, delivery is quick and reliable.
Home
Home
PRIVATE
Home
Home
SPECIFIER
Home
Home
CONTRACTORS
Home
Home
RETAILERS
Home


In 1974, DIMITRIOS ANASTASIADIS established a company, called FIBRAN SA, in Thessaloniki, Greece, to produce prefabricated construction elements for the local market.

In less than 50 years, the small Greek company has grown into a European giant: FIBRAN is today a multinational industrial group with 13 production lines, factories in 6 European countries and commercial activities in 63 countries worldwide. It is currently the 3rd European producer of extruded polystyrene and enjoys an unquestionable leadership in the field of thermal insulation, sound insulation and passive fire protection in civil, industrial and naval fields…

However, the Fibran Group has not forgotten its roots, nor lost the sense of its story that was started by Dimitrios Anastasiadis and still works in a “glocal” perspective: a global business vision, a close connection with the various local realities.
The soul of the company is still a Greek one.

Read more…

exiba

Contact and legal notices

FIBRAN d.o.o.

Revoluční 1082/8
110 00 Praha 1
Česká republika
Telefon: +420 778 981 111
E-mail: fibran@fibran.de

Legal notices

Copyright © Fibran
Development by Tessera, web design, eshops, mobile apps

    The site uses cookies. By using this website you agree to our cookie policy. More about cookies

    logo
    Powered by  GDPR Cookie Compliance
    Privacy Overview

    This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

    Google Analytics

    This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages.

    Keeping this cookie enabled helps us to improve our website.

    Please enable Strictly Necessary Cookies first so that we can save your preferences!